Canon PIXMA MP800 MP800 User's Guide - Page 81
About transmittable data - wireless printing
View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
(1) Oppose the infrared port of the mobile phone (D) to that of the machine (B) at a distance of less than 7.87" / 20 cm (C). Note z The effective angle of the IrDA port of the machine is about 10° from the central axis in both vertical and horizontal directions (A). z The allowable distance of communication with the machine depends on the mobile phone you use. For this distance, refer to your mobile phone manual. (B) (C) (A) (D) (2) Select the photo to print and send the data to the machine using the infrared communication function of the mobile phone. Printing will start after receiving all data. Note z To perform printing correctly from a mobile phone through infrared communication, the following conditions should be satisfied. - Compatible devices: The mobile phones with an IrDA port, compatible image data transmitting through Infrared communication - Printable data: Shooting image with the camera of the mobile phone z For the procedure to print from your mobile phone, refer to your mobile phone manual. z Do not place any obstacle between the infrared ports of the machine and mobile phone. Data cannot be transmitted between them. z During printing, be careful not to interrupt infrared communication with the machine. If it is interrupted, send the data from the mobile phone again. z Depending on your device, the Fine print quality option may not be available due to the restriction on the infrared transfer capacity. z We recommend printing on sticker or credit card sized paper when the print quality on other types of paper is not fine. About transmittable data z It does not support printing a downloaded content or photo and a photo attached to an E-mail for security reason. z It does not support printing video files. z Depending on the size of a photo, it may take a while for this machine to start to print after starting the infrared transfer. z Depending on your device, it may not print data stored in a memory card. z It automatically sets the photo quality and orientation (horizontal or landscape) according to the photo size. z It automatically sets to the margin according to the photo size. Chapter 6 Printing Photographs from a Wireless Communication Device 79