Canon PIXMA MP800 MP800 User's Guide - Page 143
Error No.: 1700 is Displayed, Error No.: 1851 is Displayed, Error No.: 1856 is Displayed
View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Cause Action The name of the machine being used is not selected in the [Printer] pulldown menu of the [Print] dialog box. Select [MP800] from the [Printer] pop-up menu in the [Print] dialog box of the printer driver. If [MP800] is not displayed in the printer list, follow the procedure below to confirm the settings. 1. Select [Edit Printer List...] from the [Printer] pop-up menu in the [Print] dialog box. The printer list is displayed. 2. Check that [MP800] is displayed in the printer list. If [MP800] is not displayed, install the MP Drivers again referring to the Easy Setup Instructions for the operation. Error No.: 1700 is Displayed Cause The waste ink absorber is almost full. Action Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced. Canon recommends to contact the Canon Customer Care Center as soon as possible. Error No.: 1851 is Displayed Cause Inner Cover is open when starting regular printing. Action Close Inner Cover, then press [OK] on the machine. Error No.: 1856 is Displayed Cause During regular printing, Inner Cover is opened. Action Close Inner Cover, press [OK] on the machine, then try printing again. One page of the print data being sent at the time of the error will be erased, so print that page again. Chapter 12 Troubleshooting 141