Canon Speedlite 430EX III-RT Instruction Manual - Page 16
Installing the Batteries, Open the cover. - used
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the Batteries Install four AA/R6 batteries for power supply. 1 Open the cover. Slide the battery compartment cover down, then open the battery compartment cover. 2 Install the batteries. Make sure the "+" and "-" battery contacts are correctly oriented as shown in the battery compartment. 3 Close the cover. Close the battery compartment cover and slide it up by following the procedure of step 1 in reverse. Firing Interval and Number of Flashes Firing Interval Quick Flash Normal Flash Approx. 0.1 to 2.5 sec. Approx. 0.1 to 3.5 sec. Number of Flashes Approx. 180 to 1200 times Based on new AA/LR6 alkaline batteries and Canon's testing standards. The Quick flash function enables flash shooting before the flash is fully charged (p.18). CAUTION Do not use AA/R6 lithium batteries. Note that certain AA/R6 lithium batteries may become extremely hot in rare cases during usage. Due to safety reasons, do not use "AA/R6 lithium batteries". When continually firing, do not touch the flash head, batteries, or the area near the battery compartment. When continuous flash or modeling flash is repeatedly fired with short intervals, do not touch the flash head, battery, or the area near the battery compartment. The flash head, batteries, and area near the battery compartment become hot, resulting in the risk of burn. Do not use the Speedlite while touching the same part for a long period of time. Even if the product does not feel too hot, prolonged contact with the same body part may cause skin redness, blistering or low-temperature contact burns. Using a tripod is recommended for people with circulation problems or very sensitive skin, or when using the product in very hot places. 16