Canon Speedlite 430EX III-RT Instruction Manual - Page 56
Set the flash mode to <, >., Check the transmission status, and charge status.
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
a: Fully Automatic Wireless Flash Shooting 5 Set the flash mode to . Press the button of the cross keys of the master unit. Turn to select , then press . The slave unit is set automatically to during shooting via the control from the master unit. Check that the firing group control is set to . 6 Firing group control Check the transmission status and charge status. Check that the lamp is lit in green. When the slave flash is ready, the AF- assist beam emitter blinks at approx. Slave flash ready 1-second intervals. Check that the slave flash-ready icon is lit on the master unit's LCD panel ( is not displayed). For the master unit's LCD panel illumination, see page 54. Check that the master unit's flash- ready lamp is lit. 7 Check the performance. Press the master unit's test flash button. X The slave unit fires. If it does not fire, check that it is placed within the transmission range (p.46). 8 Take the picture. Set the camera and take the picture in the same way as with normal flash shooting. 56