Canon Speedlite 430EX III-RT Instruction Manual - Page 31
DIGITAL camera released up to 2004, set the white balance to <
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
m Bounce When the bounce adapter is attached, or when the bounce adapter and the wide panel are used together, underexposure may result since the flash output decreases. Take necessary countermeasures such as increasing ISO speed on the camera or applying flash exposure compensation (p.24). Since the flash guide number decreases when the bounce adapter is attached, focusing with AF-assist beam using a series of small flashes may not be possible. Using infrared AF-assist beam is recommended (P.Fn-05-1/p.87). When Quick flash (p.18) is fired with the bounce adapter attached, taking the picture after the flash-ready lamp is lit in red is recommended since the flash output may not be sufficient. The flash coverage is set automatically when the bounce adapter is attached. You cannot change the setting. If you attach the bounce adapter to the flash when using an EOS DIGITAL camera released up to 2004, set the white balance to . If you shoot with , appropriate white balance may not be obtained. The flash light is further softened when the wide panel (p.33) is used together. If the subject is dark (underexposed) when you check the shot image, perform the flash exposure compensation (p.24). You can also increase the ISO speed when using a digital camera. 31