Canon Speedlite 430EX III-RT Instruction Manual - Page 73
Wireless Settings, Set the same channel for both the master unit and slave, unit.
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Wireless Settings Turn transmission wireless sensor (p.10) of the slave unit toward the master, using the bounce function (p.28). When shooting indoors, since the transmission signal is reflected off the walls, operation may be possible even with slightly imprecise positioning. Wireless Settings To perform flash shooting using the optical transmission wireless slave function, configure the settings as follows. Slave Unit Setting Set to . Operate and set the flash you want to set as the slave unit. Press the button of the cross keys. Turn to select , then press . To perform normal flash shooting, select to clear the wireless (slave) settings. Transmission Channel Setting To avoid interference with optical transmission wireless flash systems used by other photographers, you can change the transmission channel. Set the same channel for both the master unit and slave unit. Set a channel. Press . Turn to select the channel symbol, then press . 73