Canon Speedlite 430EX III-RT Instruction Manual - Page 78
Manual Flash Setting on a Slave Unit, Set the individual slave., Set the flash output.
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
A Manual Flash Setting on a Slave Unit You can directly operate the slave unit to manually set the flash output. This function is called individual slave. This is convenient when, for example, you use the Speedlite Transmitter ST-E2 (sold separately) to perform wireless manual flash. 1 Set the individual slave. Press the button of the cross keys. Turn to select , then press . X appears on the LCD panel. X The flash mode is set to . 2 Set the flash output. Press the button of the cross keys. Turn to set the flash output, then press . A slave unit that is set as an individual slave cannot receive flash mode control from the master unit. The unit is always fired at the manually set flash output. 78
78
You can directly operate the slave unit to manually set the flash output.
This function is called individual slave. This is convenient when, for
example, you use the Speedlite Transmitter ST-E2 (sold separately) to
perform wireless manual flash.
1
Set the individual slave.
Press the <
I
> button of the <
S
>
cross keys.
Turn <
9
> to select <
:
A
>,
then press <
8
>.
<
(
> appears on
the LCD panel.
The flash mode is set to <
q
>.
2
Set the flash output.
Press the <
O
> button of the <
S
>
cross keys.
Turn <
9
> to set the flash output,
then press <
8
>.
A
Manual Flash Setting on a Slave Unit
A slave unit that is set as an individual slave cannot receive flash mode
control from the master unit. The unit is always fired at the manually set
flash output.