Canon Speedlite 430EX III-RT Instruction Manual - Page 55
Fully Automatic Wireless Flash Shooting, Set the master unit., Check the channel and ID.
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
a: Fully Automatic Wireless Flash Shooting This section describes the basic fully automatic wireless shooting when using a 430EX III-RT attached to the camera (master) and a 430EX III-RT set as a slave unit. Autoflash Shooting Using One Slave Unit Firing group 1 Set the master unit. Set the 430EX III-RT attached to the camera as the master unit (p.50). You can also use a device equipped with the radio transmission wireless master function as the master unit. 2 Set the slave unit. Set the 430EX III-RT to be controlled wirelessly from the master as the slave unit (p.50). Set the firing group to A, B, or C (p.59). The flash will not fire if it is set to D or E. 3 Check the channel and ID. If the transmission channels and wireless radio IDs of the master unit and slave unit are different, set them to the same settings (p.51, 52). 4 Position the camera and the flash. Position them within the range shown on page 46. 55