Canon Speedlite 430EX III-RT Instruction Manual - Page 62

Wireless Multiple Flash Shooting with Manual Output, Set the flash mode to &lt, >.

Get Canon Speedlite 430EX III-RT PDF manuals and user guides View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

q: Wireless Multiple Flash Shooting with Manual Output This section describes wireless (multiple flash) shooting using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Configure all the settings on the master unit. Firing group control 1 Set the flash mode to . Press the button of the cross keys of the master unit. Turn to select , then press . 2 Set firing group control. Press . Turn to select the firing group control symbol, then press . Turn to select the group to be fired, then press . : Set all groups to the same flash output : Set the flash output of A and B : Set the flash output of A, B, and C 3 Set the flash output. Turn to select the firing group symbol, then press . Turn to set the flash output, then press . With and , repeat steps 3 to set the flash output for all groups. 4 Take the picture. X Each group fires at the set flash ratio. When is set, set A, B, or C as the firing group for the slave units (p.59). The flash will not fire if it is set to D or E. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
62
This section describes wireless (multiple flash) shooting using manual
flash. You can shoot with a different flash output setting for each slave
unit (firing group). Configure all the settings on the master unit.
1
Set the flash mode to <
q
>.
Press the <
E
> button of the
<
S
> cross keys of the master unit.
Turn <
9
> to select <
R
>, then
press <
8
>.
2
Set firing group control.
Press <
8
>.
Turn <
9
> to select the firing group
control symbol, then press <
8
>.
Turn <
9
> to select the group to be
fired, then press <
8
>.
<
T
> : Set all groups to the same
flash output
<
U
> : Set the flash output of A
and B
<
V
> : Set the flash output of A, B,
and C
3
Set the flash output.
Turn <
9
> to select the firing group
symbol, then press <
8
>.
Turn <
9
> to set the flash output,
then press <
8
>.
With <
5
> and <
7
>, repeat
steps 3 to set the flash output for all
groups.
4
Take the picture.
Each group fires at the set flash ratio.
q
: Wireless Multiple Flash Shooting with Manual Output
Firing group control
When <
8
> is set, set A, B, or C as the firing group for the slave units
(p.59). The flash will not fire if it is set to D or E.