Canon Speedlite 430EX III-RT Instruction Manual - Page 35
Metered Manual Flash Exposures, Set up an 18% gray reflector.
View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
q: Manual FlashN Metered Manual Flash Exposures When using an EOS-1D series camera, the flash exposure level can be manually set before shooting. This is effective when you are close to the subject. Use a 18% gray reflector (commercially available) and shoot as follows. 1 Configure the camera and Speedlite settings. Set the camera's shooting mode to or . Set the Speedlite flash mode to . 2 Focus on the subject. Focus manually. 3 Set up an 18% gray reflector. Place the gray reflector at the subject's position. Aim the camera so that the entire spot metering circle within the viewfinder center is over the gray reflector. 4 Press the , , or button. (8) X The Speedlite will fire a preflash and the required flash output for the correct flash exposure is retained in memory. X On the right side of the viewfinder, the exposure level indicator will show the flash exposure level against the standard exposure. 5 Set the flash exposure level. Adjust the Speedlite's manual flash output and the aperture so that the flash exposure level aligns with the standard exposure index. 6 Take the picture. Remove the gray reflector and take the picture. Metered manual flash is available only with EOS-1D series cameras. 35