Canon Speedlite 430EX III-RT Instruction Manual - Page 53

Set master flash firing to ON or, The &lt, > Lamp, Master Flash Firing ON/OFF

Get Canon Speedlite 430EX III-RT PDF manuals and user guides View all Canon Speedlite 430EX III-RT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Wireless Settings The Lamp You can check the transmission status by viewing the color of the lamp. Color Green Red Status Lit Lit Blinking Description Action Transmission OK - Not connected Check the channel and ID. Too many units Change the master and slave unit total to 16 or less. Error Turn the master unit and slave unit off and on again. If the transmission channels of the master unit and slave unit are different, the slave unit will not fire. Set both to the same number or set both to "AUTO". If the wireless radio IDs of the master unit and slave unit are different, the slave unit does not fire. Set to the same number. Master Flash Firing ON/OFF You can set whether or not to fire the master unit as a wireless flash that controls the slave unit. When master flash firing is set to ON, the master unit is fired as firing group A. Set master flash firing to ON or OFF. Press . Turn to select the flash firing symbol, then press . Turn to select master flash firing ON or OFF, then press . j: Master flash firing ON ` : Master flash firing OFF 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
53
Wireless Settings
You can check the transmission status by viewing the color of the
<
D
> lamp.
You can set whether or not to fire the master unit as a wireless flash that
controls the slave unit. When master flash firing is set to ON, the master
unit is fired as firing group A.
Set master flash firing to ON or
OFF.
Press <
8
>.
Turn <
9
> to select the flash firing
symbol, then press <
8
>.
Turn <
9
> to select master flash
firing ON or OFF, then press <
8
>.
j
: Master flash firing ON
`
: Master flash firing OFF
The <
D
> Lamp
Color
Status
Description
Action
Green
Lit
Transmission OK
–
Red
Lit
Not connected
Check the channel and ID.
Blinking
Too many units
Change the master and slave unit total to
16 or less.
Error
Turn the master unit and slave unit off and
on again.
Master Flash Firing ON/OFF
If the transmission channels of the master unit and slave unit are
different, the slave unit will not fire. Set both to the same number or set
both to “AUTO”.
If the wireless radio IDs of the master unit and slave unit are different, the
slave unit does not fire. Set to the same number.