Canon VB-H651VE User Manual - Page 109

[Camera] > [Camera] Setting General Camera Controls Settings for the camera name and external input/output devices, and for camera use and installation settings. The following settings can be configured here. • Camera Name • Camera Control • Day/Night (when Auto is set) • Clear IR Mode 5 • Installation Conditions • Camera Position Control • External Input Device 1, 2 • External Output Device 1, 2 Setting Page Camera Name Set the camera name. [Camera Name] Enter any camera name. Be sure to enter a name in [Camera Name]. Camera Control Set various controls for easier viewing of video. [Digital Zoom] Select this to enable or disable digital zoom. If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider in the Viewer (P. 68). Unlike optical zoom, the higher the digital zoom ratio, the lower the video quality. [Enhanced Digital Zoom] R13 R12 M50 H761 H760 Select this to enable or disable the enhanced digital zoom. When the video size is small, digital zoom can be used to enlarge it up to the maximum size resolution with reduced video deterioration. When [Enable] is selected, an area indicating the enhanced digital zoom and a horizontal line (blue) indicating the enhanced digital zoom telephoto end are displayed on the zoom slider of the Viewer (P. 68). [Maximum Digital Zoom Magnification] R13 R12 M50 H761 H760 Sets the maximum zoom magnification for digital zoom. 109