Canon VB-H651VE User Manual - Page 71
Operating the Camera with the Panorama Display Panel, Pan/Tilt], Pan/Tilt Speed, Zoom], Zoom Speed
View all Canon VB-H651VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
(1) R13 R12 M50 (2) R13 R12 M50 4 (3) (4) Camera Viewer (1) [Pan/Tilt] R13 R12 M50 The camera angle will move in the direction of each arrow. Movement will continue while you hold the button down, and stop when you release it. Click the center button to move the camera angle to the midpoint of the pan/tilt range of motion. However, if a view restriction is set (P. 129) and the midpoint is outside the restrict view area, the camera angle moves to the edge of the restrict view area. (2) Pan/Tilt Speed R13 R12 M50 Set the operation speed by the [Pan/Tilt] button. (3) [Zoom] Click the buttons to zoom in and out. Movement will continue while you hold the button down, and stop when you release it. (4) Zoom Speed Set the operation speed by the [Zoom] button. Note Even if you change the pan/tilt speed or zoom speed setting, the speed of pan/tilt/zoom operations on the slider or panorama does not change. Operating the Camera with the Panorama Display Panel R13 R12 M50 You can operate the camera using the frames within the panorama display panel. To display a panorama image in the panorama display panel, you must create the image and save it to the camera (P. 124). 1 Click the [Panorama Display] button. The [Panorama Display] panel is shown in the control display area. 2 Use the frame in the panorama display panel to pan/tilt/zoom the camera. The frame indicates the area being captured by the current camera. 71