Canon VB-H651VE User Manual - Page 222

Caution • You must not turn off the camera while [Revert to Initial Settings] is in operation. Turning off the camera at this stage may result in disabling its ability to boot correctly. • Once [OK] is clicked, you can no longer stop the process of restoring the default settings. [Network Settings] If you set this to [Save], the following settings are retained when initializing. • Administrator Name • Password • Network Settings • Time Zone • Certificates • Private Key If you set this to [Do not save], the above settings are also initialized. Since the administrator account is also initialized, you will become unable to connect to the camera. Use the Camera Management Tool to configure the initial settings (P. 38). [Revert to Initial Settings] The initial settings are restored according to the selection in [Network Settings] after rebooting. Note • It is recommended that you back up each current setting before you click [Exec] in [Revert to Initial Settings]. • The camera can also be restored to factory default settings using the reset switch. Note, however, that this will reset all camera settings to factory default settings except for date and time (P. 247). 222