Canon VB-H651VE User Manual - Page 176

• If the display switches between Day mode and Night mode, [Restarting intelligent function. Please wait.] is displayed and intelligent function will restart. • If [Basic] > [Video] > [All Videos] > [Video Size Set] settings on the Setting Page are changed, be sure to change the preset position settings ( R13 R12 M50 H761 H760 ) and Intelligent Function settings, and check operations. The Intelligent Function may not operate, depending on the settings. R13 R12 M50 H761 H760 • Please set the Intelligent Function again if the angle of view has changed through camera operation, or the preset/home position has changed. • If [Status] in [Detection Settings] has [Enabled] when the camera position is fixed, control privileges cannot be obtained by the Viewer connected by the user without privileges for privileged camera control or RM Viewer. Also, the preset tour will no longer run. • If you use a preset registered with the digital zoom, the camera position at registration may not be able to be reproduced with a high degree of accuracy. Therefore, it is recommended that you use a preset registered in the optical zoom area for the intelligent function.  Difficult-to-Detect Subjects The following subjects may not be detected/tracked, or may result in erroneous detection/tracking. • Objects or areas where there is little contrast in color or brightness with the background may not be detected/ tracked. • Small objects and changes on the screen may not be detected/tracked. • Partial or entire changes in brightness on the screen may trigger detection/tracking. • When there are multiple overlapping objects, there may be a change in detection. For example, objects passing may either not be detected or the timing of detection may be incorrect. • When there are large numbers of objects in the scene, objects may not be properly detected/tracked. R13 R12 • Objects with little movement may not be tracked. • Objects directly below the camera may take time to be tracked. • Areas with bright reflections or selected areas that are very bright, can result in an object not probably being tracked. Registering Presets R13 R12 M50 H761 H760 It is strongly recommended that you register the camera angle as a preset in advance and lock the camera to that position when using video detection. It is also recommended that the angle of view that captures targeted objects at a larger ratio be used. For details on preset registration, please refer to "[Camera] > [Preset] Registering Presets" (P. 132). Selecting the Intelligent Function Operation Mode R13 R12 Video detection and auto tracking cannot be used simultaneously. You can select which one to use on the Setting Page for the intelligent function. Note The applied settings are retained even if you change operation modes. 1 Select [Video Detection] or [Auto Tracking]. 176