Cisco SPA509 User Guide - Page 38
Disabling Do Not Disturb, Setting Call Waiting
View all Cisco SPA509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Using Basic Call Management Functions Setting Call Waiting STEP 5 Press save. 3 Disabling Do Not Disturb Do Not Disturb Softkey To deactivate Do Not Disturb, press the -dnd softkey. Do Not Disturb Deactivation by using the Star Code Enter *79 to deactivate Do Not Disturb. Do Not Disturb Deactivation by using Setup You can also deactivate Do Not Disturb by pressing the Setup button and selecting Preferences > Do Not Disturb. Setting Call Waiting Call waiting alerts you to an incoming call while you are on another call by ringing your phone and displaying a status message. If you turn call waiting off, incoming calls do not ring your phone while you are on another call; the incoming call hears a busy signal or message. Call waiting can be enabled continuously or on a per-call basis. You can also turn call waiting on or off from your PC by using the IP phone Web interface. For the Cisco SPA501G, you can only configure Call Waiting in the web configuration utility or set Call Waiting by using the Star Code. Using Setup STEP 1 Press Setup. STEP 2 Select Preferences. STEP 3 Choose Call Waiting and press edit. STEP 4 Press the y/n softkey to toggle call waiting on or off. STEP 5 Press ok. Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 38