Cisco SPA509 User Guide - Page 60
Using the Interactive Voice Response Menu on the Cisco SPA501G, Using Advanced Phone Features, Number
View all Cisco SPA509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Using Advanced Phone Features Using the Interactive Voice Response Menu on the Cisco SPA501G 4 Using the Interactive Voice Response Menu on the Cisco SPA501G The Cisco SPA501G provides an interactive voice response menu. You can enter options and receive information about the phone and its operation. To access the IVR: STEP 1 Press the Setup button. Enter the IVR option by pressing the numbers of the option, then press #. Some menus require entering of further information or numbers. Typical options you might use are listed in the following table: Number 100 110 120 130 140 150 160 170 180 220 221 Option Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled. Recites the IP address of the phone. Recites the netmask of the phone. Recites the gateway address. Recites the MAC (hardware) address of the phone. Recites the phone software version. Recites the primary DNS server address. Recites the HTTP port on which the web server listens. Defaults to 80. Recites the IP multicast address (used by a Cisco Voice System to communicate with the IP phone). Recites the method of call control (SIP or SPCP). Set call control-enter the value for the call control method you want, then press #: • 0: SIP • 1: SPCP To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 60