Cisco SPA509 User Guide - Page 61

Using Advanced Phone Features Using the Interactive Voice Response Menu on the Cisco SPA501G 4 Number 73738 87778 732668 111 121 131 161 181 Option Restore the phone to the factory default software and settings. Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and begin the restore process. Restore the phone's user settings to the default. (Clears all user settings such as speed dials.) Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and begin the restore process. Reboot the phone. After entering #, hang up to begin rebooting. Set a static IP address. Enter the address (use * to enter the "." value), then press #. To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message. Set a netmask. Enter the address (use * to enter the "." value), then press #. To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message. Set a gateway. Enter the address (use * to enter the "." value), then press #. To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message. Set the address of the primary Domain Name Server (DNS). Enter the address (use * to enter the "." value), then press #. To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. Set the IP multicast address (used by a Cisco Voice System to communicate with the IP phone). Enter the address (use * to enter the "." value), then press #. To save, press 1. To review the value you entered, press 2. To re-enter, press 3. To exit, press *. Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide 61