Cisco VG204 Software Configuration Guide - Page 32
Detailed Steps - fax configuration
View all Cisco VG204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Auto-Configuration on the Cisco VG202 and Cisco VG204 Voice Gateways Chapter 4 Configuring Voice DETAILED STEPS 7. fax protocol t38 [nse[force]] 8. ccm-manager sccp local interface-type interface-number 9. ccm-manager config server tftp_ip_address 10. ccm-manager sccp 11. exit Command or Action Step 1 enable Purpose Enters privileged EXEC mode. Step 2 Example: VG# enable configure terminal Step 3 Example: VG# configure terminal interface type slot/port Step 4 Example: VG(config)# interface fastethernet 0/0 ip address dhcp Step 5 Example: VG(config-if)# ip address dhcp sccp local interface-type interface-number port port-type Enters global configuration mode. You have entered global configuration mode when the prompt changes to VG(config)#. Enters interface configuration mode and specifies the type of interface you plan to configure. You have entered interface configuration mode when the prompt changes to VG(config-if)#. Acquires an IP address on an interface from the Dynamic Host Configuration Protocol (DHCP). Enables the SCCP and its related applications (transcoding and conferencing). Step 6 Example: VG(config)# sccp local fastethernet 0/0 voice service voip Step 7 Example: VG(config)# voice service voip fax protocol t38 [nse[force]] Step 8 Example: VG(config)# fax protocol t38 nse force ccm-manager sccp local interface-type interface-number Enters voice-service configuration mode and specifies a voice-encapsulation type. Specifies the global default ITU-T T.38 standard fax protocol to be used for all VoIP dial peers. Selects the local interface that the SCCP application uses to register with Cisco CallManager. Example: VG(config)# ccm-manager sccp local fastethernet 0/0 Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide 4-6 OL-16191-01