Cisco VG204 Software Configuration Guide - Page 34

sccp ccm group, associate ccm, priority, dial-peer voice, service stcapp - sccp configuration

Get Cisco VG204 PDF manuals and user guides View all Cisco VG204 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Configuring the Voice Interface for Cisco CallManager Chapter 4 Configuring Voice DETAILED STEPS 17. sccp 18. sccp ccm group group-number 19. associate ccm identifier-number priority priority-number 20. dial-peer voice tags pots 21. service stcapp 22. port port-number 23. exit Command or Action Step 1 enable Step 2 Example: VG# enable configure terminal Step 3 Example: VG# configure terminal stcapp ccm-group group-id Step 4 Example: VG(config)# stcapp ccm-group 1 stcapp Step 5 Example: VG(config)# stcapp stcapp feature access-code Step 6 Example: VG(config)# stcapp feature access-code stcapp feature speed-dial Step 7 Example: VG(config)# stcapp feature speed-dial voice-port slot-number/port Step 8 Example: VG(config)# voice-port 0/0 timeouts initial seconds Example: VG(config-voiceport)# timeouts initial 60 Purpose Enters privileged EXEC mode. Enters global configuration mode. You have entered global configuration mode when the prompt changes to VG(config)#. Configures the Cisco CallManager group number for use by the SCCP Telephony Control Application (STCAPP). Enables STCAPP. Enables STC application feature access codes and enters their configuration mode. Enables STC application feature speed-dial codes and enters their configuration mode. Enters voice-port configuration mode. Configures the initial digit timeout value for a specified voice port. Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide 4-8 OL-16191-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
4-8
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
OL-16191-01
Chapter 4
Configuring Voice
Configuring the Voice Interface for Cisco CallManager
17.
sccp
18.
sccp ccm group
group-number
19.
associate ccm
identifier-number
priority
priority-number
20.
dial-peer voice
tags
pots
21.
service stcapp
22.
port
port-number
23.
exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
VG# enable
Enters privileged EXEC mode.
Step 2
configure terminal
Example:
VG# configure terminal
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Step 3
stcapp ccm-group
group-id
Example:
VG(config)# stcapp ccm-group 1
Configures the Cisco CallManager group number for use
by the SCCP Telephony Control Application (STCAPP).
Step 4
stcapp
Example:
VG(config)# stcapp
Enables STCAPP.
Step 5
stcapp feature access-code
Example:
VG(config)# stcapp feature access-code
Enables STC application feature access codes and enters
their configuration mode.
Step 6
stcapp feature speed-dial
Example:
VG(config)# stcapp feature speed-dial
Enables STC application feature speed-dial codes and
enters their configuration mode.
Step 7
voice-port
slot-number/port
Example:
VG(config)# voice-port 0/0
Enters voice-port configuration mode.
Step 8
timeouts initial
seconds
Example:
VG(config-voiceport)# timeouts initial 60
Configures the initial digit timeout value for a specified
voice port.