Cisco WS-C1912-A Hardware Installation Guide - Page 24
Removable, Interchangeable, and Optional Modules, Interface, Description
UPC - 746320021522
View all Cisco WS-C1912-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Hardware Features Chapter 1 Overview of the Router Note Either the RJ-45 console port or USB console port may be used. They can not both be used at the same time. Table 1-1 Interfaces Available on the Cisco 1900 Series Routers Interface Gigabit Ethernet (GE) RJ-45 Console Auxiliary USB console USB Description Two GE ports (RJ-45 connectors). One console port (RJ-45 connector). One auxiliary port (RJ-45 connectors). In addition to the RJ-45 Console port, the Cisco 1900 ISRs have a USB 5-pin mini Type-B port. When first connecting to this port, a USB driver must be installed. You will be prompted to install the driver. Simply follow the installation prompts to install the driver. Two USB 2.0 Type-A compliant ports;1940 series. One USB 2.0 Type-A compliant port; 1905 and1921.These ports are backward compatible with USB1.1 devices. The USB port provides connection for USB devices such as security tokens and flash memory. Removable, Interchangeable, and Optional Modules Some modules can be installed either by inserting them into slots on the chassis, or by opening the chassis and plugging them into connectors inside. The WLAN is factory installed. • CompactFlash memory and enhanced high-speed WAN interface cards (EHWICs) fit into slots on the Cisco 1940 series chassis, and can be installed or removed without opening the chassis. • A connector inside the Cisco 1940 series chassis accommodates an optional field installable Internal Service Module (ISM). See Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs. • The ISM connector inside the Cisco 1941W chassis accommodates an optional factory installed wireless LAN card. The WLAN card is permanently installed in the ISM connector. • Cisco 1940 series ISRs feature an optional upgrade to the internal power supply providing in-line power (802.3af-compliant Power-over-Ethernet (PoE) and Cisco standard inline power) to optional integrated switch modules. The Cisco 1905, and Cisco 1921 have an external feed for PoE. (See Figure 1-2.) • There are no user-installable or replaceable modules on the Cisco 1905 or Cisco 1921 routers. The chassis cover should never be removed. Caution Power off the PoE before installing an EHWIC in the Cisco 1905 and Cisco 1921 ISRs. Table 1-2 summarizes the optional modules: Cisco 1900 Series Hardware Installation 1-8 OL-19084-02