Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 28
Removing the Hard Disk Drive (User-Replaceable
View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removing the Hard Disk Drive (User-Replaceable) Required Equipment • #1 Phillips screwdriver. Removal Procedure Important If you are installing a new hard disk drive, load the factory software and operating system on the drive as described in "Recovering the Factory Software," as shown on the next page. 1. Unplug the AC adapter, if present, and then remove the battery. 2. On the bottom of the notebook, remove the hard drive rubber screw plugs and retaining screws. 3. Carefully pull the hard drive out of the notebook. Screw, M2.5×6mm (2) Figure 2-5. Removing the Hard Disk Drive Service Manual Removal and Replacement 2-7
Service Manual
Removal and Replacement
2-7
Removing the Hard Disk Drive
(User-Replaceable)
Required Equipment
•
#1 Phillips screwdriver.
Removal Procedure
Important
If you are installing a new hard disk drive, load the factory software and operating system on the
drive as described in “Recovering the Factory Software,” as shown on the next page.
1.
Unplug the AC adapter, if present, and then remove the battery.
2.
On the bottom of the notebook, remove the hard drive rubber screw plugs and retaining screws.
3.
Carefully pull the hard drive out of the notebook.
Figure 2-5. Removing the Hard Disk Drive
Screw, M2.5×6mm (2)