Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 32
Removing the Keyboard Cover, Reassembly Note
View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. If necessary, while holding the center of the cover, carefully insert the flat-blade screwdriver under the right side of the display assembly hinge, gently pry up, and then lift the cover out. This procedure might need to be repeated on the left side of display assembly hinge to completely remove the cover. Screw, M2.5×4mm (2) Figure 2-7. Removing the Keyboard Cover Reassembly Note • Insert the tabs on the left- and right-center of the panel into the mating slots under the keyboard, and then press the panel into place. Service Manual Removal and Replacement 2-11
Service Manual
Removal and Replacement
2-11
4.
If necessary, while holding the center of the cover, carefully insert the flat-blade screwdriver under
the right side of the display assembly hinge, gently pry up, and then lift the cover out. This
procedure might need to be repeated on the left side of display assembly hinge to completely
remove the cover.
Figure 2-7. Removing the Keyboard Cover
Reassembly Note
•
Insert the tabs on the left- and right-center of the panel into the mating slots under the keyboard,
and then press the panel into place.
Screw, M2.5×4mm (2)