Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 36

Removing the Switchboard PCA (User-Replaceable

Get Compaq Presario 1100 - Notebook PC PDF manuals and user guides View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Removing the Switchboard PCA (User-Replaceable) Required Equipment • #1 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove the keyboard cover (page 2-10). 3. Disconnect both the 2-wire and 4-wire cables that connect the switchboard PCA to the top case and speaker assembly, respectively. 4. Remove the screws that secure the keyboard and switchboard PCA to the top case (page 2-13). 5. Gently lift up on the keyboard, carefully remove the switchboard PCA from the top case, and then disconnect the underside motherboard cable. Screw, M2.5×4mm Figure 2-10. Removing the Switchboard PCA Reassembly Note • Connect the underside motherboard cable before installing the switchboard PCA. Service Manual Removal and Replacement 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Service Manual
Removal and Replacement
2-15
Removing the Switchboard PCA
(User-Replaceable)
Required Equipment
•
#1 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and then remove the battery.
2.
Remove the keyboard cover (page 2-10).
3.
Disconnect both the 2-wire and 4-wire cables that connect the switchboard PCA to the top case and
speaker assembly, respectively.
4.
Remove the screws that secure the keyboard and switchboard PCA to the top case (page 2-13).
5.
Gently lift up on the keyboard, carefully remove the switchboard PCA from the top case, and then
disconnect the underside motherboard cable.
Figure 2-10. Removing the Switchboard PCA
Reassembly Note
•
Connect the underside motherboard cable before installing the switchboard PCA.
Screw, M2.5×4mm