Compaq Presario 1100 Compaq Evo Notebook N1010v Series and Compaq Presario 110 - Page 48
Removing the Heatsink (with Fan) (Authorized Service Providers Only
View all Compaq Presario 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removing the Heatsink (with Fan) (Authorized Service Providers Only) Required Equipment • #0 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-6). • Keyboard cover (page 2-10). • Switchboard PCA (page 2-13). • Keyboard (page 2-13). • Display assembly (page 2-17). • Top case (page 2-20). 3. Remove all three retaining screws. 4. Lift up on the heatsink (with fan) and then disconnect the fan cable from the motherboard. Screw, M2.5×4mm (3) Figure 2-16. Removing the Heatsink (with Fan) Service Manual Removal and Replacement 2-27
Service Manual
Removal and Replacement
2-27
Removing the Heatsink (with Fan)
(Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1.
Unplug the AC adapter, if present, and remove the battery.
2.
Remove these additional assemblies:
•
Hard disk drive (page 2-6).
•
Keyboard cover (page 2-10).
•
Switchboard PCA (page 2-13).
•
Keyboard (page 2-13).
•
Display assembly (page 2-17).
•
Top case (page 2-20).
3.
Remove all three retaining screws.
4.
Lift up on the heatsink (with fan) and then disconnect the fan cable from the motherboard.
Figure 2-16. Removing the Heatsink (with Fan)
Screw, M2.5×4mm (3)