D-Link 502G User Guide - Page 19

Power On Router - dsl drivers

Get D-Link 502G - DSL Router - EN PDF manuals and user guides View all D-Link 502G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

DSL-502G ADSL Router User's Guide Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable. If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable. USB Cable To Power Source ADSL Line Ethernet Cable Figure 4. Router with USB and Ethernet to PC Connection USB Connections The DSL-502G can connect to one computer through the USB interface. This connection provides access to the Internet through the ADSL connections as well as to other computers on the LAN through the Ethernet port. In order to use the USB port two drivers must be installed on any system that will be using it. See the next chapter for instructions on how to install the USB drivers. Power On Router To power on the device: 1. Insert the AC Power Adapter cord into the power receptacle located on the right side panel of the Router and plug the adapter into a nearby power source. 2. You should see the Power LED indicator light up and remain lit. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
DSL-502G ADSL Router User’s Guide
7
Hub or Switch to Router Connection
Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable. If you
wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports
(1x, 2x, etc.) with a crossed cable.
Figure 4. Router with USB and Ethernet to PC Connection
USB Connections
The DSL-502G can connect to one computer through the USB interface.
This connection provides
access to the Internet through the ADSL connections as well as to other computers on the LAN
through the Ethernet port.
In order to use the USB port two drivers must be installed on any system
that will be using it. See the next chapter for instructions on how to install the USB drivers.
Power On Router
To power on the device:
1.
Insert the AC Power Adapter cord into the power receptacle located on the right side panel of the Router and
plug the adapter into a nearby power source.
2.
You should see the Power LED indicator light up and remain lit.
To
Power
Source
Ethernet
Cable
USB
Cable
ADSL Line