D-Link 502G User Guide - Page 83
Line Splitter, Line Splitter Installation - phone
View all D-Link 502G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
DSL-502G ADSL Router User's Guide Line Splitter If you are instructed to use a "line splitter", you must install the device between the Modem and the phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack, the Modem and if desired, a telephone or telephone device. The connection ports are typically labeled as follows: Line - This port connects to the wall jack. ADSL - This port connects to the Modem. Phone - This port connects to a telephone or other telephone device. The diagram below illustrates the proper use of the splitter. Line Splitter Installation 71
DSL-502G ADSL Router User’s Guide
71
Line Splitter
If you are instructed to use a “line splitter”, you must install the device between the Modem and the phone jack.
Use standard telephone cable with standard RJ-11 connectors. The splitter has three RJ-11 ports used to connect
to the wall jack, the Modem and if desired, a telephone or telephone device. The connection ports are typically
labeled as follows:
Line
- This port connects to the wall jack.
ADSL
– This port connects to the Modem.
Phone
– This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of the splitter.
Line Splitter Installation