D-Link 502G User Guide - Page 54
Static Route Configuration - Modify/Add
View all D-Link 502G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
DSL-502G ADSL Router User's Guide Static Route Configuration - Modify/Add Figure 23. Static Route Configuration Menu To add or modify a static route, define the following parameters: Name Provide a name for the static route or subnet (optional). IP Address Type in the IP address of the subnet or device where packets are routed. Subnet Mask Type in an appropriate subnet mask that allows the static route to function. Gateway Type in the IP address of the gateway used for traffic destined for the specified subnet or device. Metric Type in the maximum number of hops allowed for the static route. State Enable of disable the route using the drop-down menu. Click on OK to put the static route into the table. It will appear in the Static Route Table shown previously. To clear the settings for this configuration, click the Clear button. To return to the Static Route Table, click the Exit icon. 42