D-Link DBS-2000-10MP User Manual - Page 32
Changing the Device Connection to, Static IP, 1.1.6 Viewing and Customizing the, Switch
View all D-Link DBS-2000-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. When prompted to confirm, click Yes. 5. Select a VLAN ID from the drop-down menu to assign the switch to a VLAN. Note: VLAN and Voice VLAN settings can be configured on the Profile Basic Settings page. Refer to the Configuring Basic Switch Profile Settings section on page 50 for more information. 6. Click Apply. 7.1.1.5 Changing the Device Connection to Static IP 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Basic tab in the top-right of the screen. 3. In the IP Connection section, select a Static IP as the Type. Note: Changing the connection type may disrupt the connection to the Nuclias Cloud. 4. When prompted to confirm, click Yes. 5. Specify the following information: Local IP VLAN Subnet Mask Gateway DNS server#1 DNS server#2 DNS server#3 Enter a valid IP address. [Optional] Check to enable VLAN functionality. This segments traffic on the SSID. Enter a subnet mask. Enter a default gateway address. Enter a primary Domain Name System (DNS) server address. [Optional] Enter a secondary Domain Name System (DNS) server address. [Optional] Enter a tertiary Domain Name System (DNS) server address. 6. Click Apply. 7.1.1.6 Viewing and Customizing the Switch Performance Summary 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Summary tab in the top-right of the screen. 23