D-Link DBS-2000-10MP User Manual - Page 36
Performing a Blink LED Test
View all D-Link DBS-2000-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Tools tab in the top-right of the screen. 3. In the IP address/FQDA field in the Ping section, enter a valid IP address or FQDA. 4. Click Ping. 7.1.1.10 Performing a MAC Forwarding Table Test 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Tools tab in the top-right of the screen. 3. In the MAC Forwarding Table section, click Run. 7.1.1.11 Performing a Cable Test 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Tools tab in the top-right of the screen. 3. In the Cable Test section, enter the port numbers to run the cable test on. Note: The scan will only be performed on ports with a physical connection. 4. Click Test. 7.1.1.12 Performing a Port Cycle Test 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Tools tab in the top-right of the screen. 3. In the Cycle Port section, enter the port numbers to run the cable test on. 4. Click Test. 7.1.1.13 Performing a Blink LED Test 1. Navigate to the Monitor > Switch > Device page and select a device from the list. 2. Select the Tools tab in the top-right of the screen. 3. In the Others section, click Start. Note: The Start button will change to Stop once the test begins. 4. Click Stop to end the test. 7.1.1.14 Manually Rebooting a Device 27