D-Link DBS-2000-10MP User Manual - Page 98
Adding and Registering a Single, Device to a Site, 4.2 Adding a Single Device to the, Inventory
View all D-Link DBS-2000-10MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
10.4.1 Adding and Registering a Single Device to a Site When adding a new device, assigning a Site and Profile to a device during the device registration process allows it to be used immediately. 1. Navigate to the Settings > Inventory page. 2. Click Add device. 3. Specify the following information: Device UID Device Name Enter the device's Unique Identifier (UID) found on the label printed on the device. The UID may be listed in the format XXXX-XXXXXXXX or XXXXXXXXXXXX. When entering the UID, do not include dashes. Enter a name for the device. 4. Under Register device, select Enable. 5. Specify the following information: Site Profile License Key Select a Site to link this device to. Select a Profile for this device. The device will use the settings configured in that profile. [Optional] Enter the device license key. Note: Every new device will be issued a one-year free license key. Once expired, an additional license must be purchased to continue using the device. 6. Click Save. 10.4.2 Adding a Single Device to the Inventory Adding a new device to the Inventory stores the device in a warehouse where it is kept inactive until it is manually assigned to a Site and Profile by the user at a later point. 1. Navigate to the Settings > Inventory page. 89