D-Link DNS-327L User Manual - Page 18
Step 3, inserted, the arrow on the bracket points
View all D-Link DNS-327L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 2 - Getting Started Step 3 - Attach the hard drive brackets to the sides of your hard drives with the included screws. Ensure the brackets are aligned so that when the hard drive is inserted, the arrow on the bracket points to the front of the NAS . Step 4 - Insert up to two 3.5" SATA hard drives into the drive bays. Note: Make sure to align the drive connector to the SATA connector at the bottom of the drive bay of the DNS-327L. Gently push the drive in until it connects. When a drive is inserted properly, you will feel it "set" into the connector. Some hard drives that are thin or oddly shaped may need to be inserted carefully into position. If a drive is not properly set in place, the hard drive LED will not illuminate after powering on the device. D-Link DNS-327L User Manual 13