D-Link DWL-1700AP Product Manual - Page 61

Appendix 2, Boot Code/Firmware Upgrade

Page 61 highlights

Appendix 2: Boot Code/Firmware Upgrade This procedure is optional. If you wish to upgrade the Boot Code, check the D-Link support website to see if the Boot Code has been upgraded. If it has, and you wish to upgrade it (optional), here is the procedure to upgrade the Boot Code, program firmware and Web image by using the console port. Command explanation: DLSC Erase the old configuration file DLX Upgrade AP Boot Code DLS Upgrade program image file DLP Upgrade Web image file BE CAREFUL!! If you failed in any command, please DO NOT "Power Off" or "Reboot" the machine!! You must RETRY this command until it succeeds! Procedure: 1. Connect the power supply to the Inline Power Injector and the power outlet. 2. Connect MIL-C-5015 style Ethernet cable into the Special Ethernet port of the DWL-1700AP. 3. Connect the RJ-45 Ethernet connector (another end of MIL-C-5015 style Ethernet cable) into the Power & Data Output Port of the Inline Power Injector. 4. Connect the MIL-C-5015 style RS232 Console Port cable into the PC COM port and the DWL-1700AP special serial port. Use HyperTerminal to upgrade the software: Click Start and then select Programs > Accessories > Communications > HyperTerminal. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79

61
Appendix 2:
Boot Code/Firmware Upgrade
This procedure is optional.
If you wish to upgrade the Boot Code, check the D-Link
support website to see if the Boot Code has been upgraded. If it has, and you wish
to upgrade it (optional), here is the procedure to upgrade the Boot Code, program
firmware and Web image by using the console port.
Command explanation:
DLSC
Erase the old configuration file
DLX
Upgrade AP Boot Code
DLS
Upgrade program image file
DLP
Upgrade Web image file
BE CAREFUL!!
If you failed in any command, please
DO NOT
“Power Off”
or
“Reboot”
the machine!! You must
RETRY
this command until it succeeds!
Procedure:
1.
Connect
the
power supply
to the
Inline Power Injector
and the power outlet.
2.
Connect
MIL-C-5015 style Ethernet cable
into the
Special Ethernet port
of the
DWL-1700AP.
3.
Connect the
RJ-45 Ethernet connector
(another end of MIL-C-5015 style
Ethernet cable) into the
Power & Data Output Port
of the Inline Power Injector.
4.
Connect the
MIL-C-5015 style RS232 Console Port cable
into the PC COM port
and the DWL-1700AP special serial port.
Use HyperTerminal to upgrade the software: Click
Start
and then select
Programs
>
Accessories
>
Communications
>
HyperTerminal
.