D-Link DXS-3600-EM-STACK Hardware Installation Guide - Page 31

DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Port Specifications SFP+ Direct Attached Cables (DAC): • Direct Attached Cables are cables with a built-in SFP+ transceivers at both ends. • DEM-CB100S (10GbE SFP+ 1m Direct Attach Cable) • DEM-CB300S (10GbE SFP+ 3m Direct Attach Cable) • DEM-CB700S (10GbE SFP+ 7m Direct Attach Cable) LED Indicators Location Per Device LED Power1, Power 2 Color Green Amber Management (MGMT) Green Console Green Fan 1, Fan 2, Fan 3 Green Amber SD Green Stacking ID (7-segment LED) Red Green Status Light on (Solid) Light off Light on (Solid) Light blinking Light on (Solid) Light blinking Light off Light on (Solid) Light off Light on (Solid) Light off Light on (Solid) Light blinking Light on (Solid) Light blinking Light off Light on (Solid) Light on (1-12) Light on (H) Light on (h) Light on (E) Light on (G) Description Power on Power off Power supply failure Power supply module present, but AC or DC input is problematic. A reversed airflow power supply was inserted. Link present. No data transmission. Activity. Data transmission. No link present or the port was shutdown. Console on Console off Diagnostics pass. Functioning normal. No power. Busy booting or running diagnostics. Fan failure or reversed airflow fan was inserted. SD plugged in. Busy reading/writing. No link. Read/Write failure. Stacking number displayed. Stacking Master Stacking Backup Master System self-test error Safeguard Engine in exhausted mode 25