Dell Alienware Area-51 R4 Service Manual - Page 125
Remove the jumper plug from pins 1 and 2 and replace it on pins 2 and 3., Replace
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
3. Remove the left and right side-panels. See "Removing the side panels". 4. Locate the CMOS jumper (RTC_CLR1) on the system board. See "system-board components". 5. Remove the jumper plug from pins 2 and 3 and fix it on pins 1 and 2. 6. Wait for approximately five seconds to clear the CMOS setting. 7. Remove the jumper plug from pins 1 and 2 and replace it on pins 2 and 3. 1. pin 1 3. pin 3 2. pin 2 4. jumper plug 8. Replace the left and right side panels. See "Replacing the side panels". 9. Replace the stability foot. 125
3.
Remove the left and right side-panels. See “
Removing the side panels
”.
4.
Locate the CMOS jumper (RTC_CLR1) on the system board. See “
system-board components
”.
5.
Remove the jumper plug from pins 2 and 3 and fix it on pins 1 and 2.
6.
Wait for approximately five seconds to clear the CMOS setting.
7.
Remove the jumper plug from pins 1 and 2 and replace it on pins 2 and 3.
1.
pin 1
2.
pin 2
3.
pin 3
4.
jumper plug
8.
Replace the left and right side panels. See "
Replacing the side panels
”.
9.
Replace the
stability foot
.
125