Dell Alienware Area-51 R4 Service Manual - Page 74
Replacing the front-bezel heat-sensor cable, Procedure, Post-requisites
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Replacing the front-bezel heat-sensor cable NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Route the front-bezel heat-sensor cable through the bracket. 2. Align the tab on the front-bezel heat-sensor cable on the chassis. 3. Push the release tab on the front-bezel heat-sensor cable and press it into place. Post-requisites 1. Replace the PCI fan. 2. Replace the left and right side-panels. See "Replacing the side panels". 3. Replace the stability foot. 74