Dell Alienware Area-51 R4 Service Manual - Page 87
Removing the handle bars, Prerequisites, Procedure
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Removing the handle bars NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the stability foot. 2. Remove the left and right side-panels. See "Removing the side panels". Procedure 1. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis. a. screws (7) b. chassis c. rear-handle bar 2. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis. 3. Press the rear-handle bar to release the securing tab and remove the rear-handle bar. 87