Dell Alienware Area-51 R4 Service Manual - Page 73
Removing the front-bezel heat sensor cable, Prerequisites, Procedure
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removing the front-bezel heat sensor cable NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the stability foot. 2. Remove the left and right side-panels. See "Removing the side panels". 3. Remove the PCI fan. Procedure NOTE: After removing the PCI fan, locate the sensor on the fan shroud. 1. Lay the chassis on the right side. 2. Push the release tab and pry the front-bezel heat-sensor cable off the chassis. a. front-bezel heat-sensor cable b. release tab c. fan shroud 73