Dell Alienware Area-51 R4 Service Manual - Page 47
Removing the memory modules, Prerequisites, Procedure
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Removing the memory modules NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the stability foot. 2. Remove the left and right side-panels. See "Removing the side panels". Procedure 1. Lay the chassis on the left side. 2. Locate the memory modules on the system board. For more information on the memory modules see "system-board components". 3. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot. 4. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot. NOTE: Repeat step 2 to step 3 to remove any other memory modules installed in your computer. a. securing clips (2) b. memory module c. memory-module slot 47