Dell Alienware Area-51 R4 Service Manual - Page 28
Replacing the battery case, Procedure, Post-requisites
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing the battery case NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Align the screw holes on the battery case with the screw holes on the chassis. 2. Replace the two screws (#6-32x5.2) that secure the battery case to the chassis. 3. Connect the battery-case cable to the I/O board. Post-requisites 1. Replace the battery. 2. Replace the right side-panel. See "Replacing the side panels". 3. Replace the stability foot. 28