Dell Alienware Area-51 R4 Service Manual - Page 69
Removing the PCI fan, Prerequisites, Procedure, For more safety best practices
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Removing the PCI fan NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the stability foot. 2. Remove the left and right side-panels. See "Removing the side panels". Procedure 1. Lay the chassis on the right side. 2. Remove the four screws (#6-32x6) that secure the graphics-card bracket to the chassis. 3. Slide the graphics-card bracket out of the chassis. a. screws (4) b. graphics-card bracket 4. Remove the two screws (M3x5.25) that secure the PCI fan to the chassis. 69