Dell Alienware Area-51 R4 Service Manual - Page 43
Replacing the I/O board, Procedure, Post-requisites
View all Dell Alienware Area-51 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Replacing the I/O board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Align the ports on the I/O board with their respective slots on the chassis and slide it into place. 2. Align the screw holes on the I/O board to the screw holes on the chassis. 3. Replace the five screws (#6-32x6) that secure the I/O board to the chassis. 4. Connect the cables to the I/O board. NOTE: The connectors on the I/O board are color coded. Make sure that you match the color of the I/O board connector with the cable connector. For more information on I/O connectors, see I/O-board components". Post-requisites 1. Replace left and right side-panels. See "Replacing the side panels". 2. Replace the stability foot. 43