Dell Alienware m17 R2 Service Manual - Page 13
M.2 solid-state drive, Removing the M.2 2230 solid-state drive
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Steps 1. Connect the battery cable to the system board. 2. Slide the notches on the top of the base cover under the rear I/O-cover and snap the base cover into place on the palm-rest assembly. 3. Tighten the six captive screws on the base cover. 4. Replace the two screws (M2.5x5) that secure the base cover to the palm-rest assembly. Next steps 1. Follow the procedure in After working inside your computer. M.2 solid-state drive Removing the M.2 2230 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 13
Steps
1.
Connect the battery cable to the system board.
2.
Slide the notches on the top of the base cover under the rear I/O-cover and snap the base cover into place on the palm-rest
assembly.
3.
Tighten the six captive screws on the base cover.
4.
Replace the two screws (M2.5x5) that secure the base cover to the palm-rest assembly.
Next steps
1.
Follow the procedure in
After working inside your computer
.
M.2 solid-state drive
Removing the M.2 2230 solid-state drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
13