Dell Alienware m17 R2 Service Manual - Page 33
Left I/O-board, Removing the left I/O-board
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Steps 1. Using the alignment posts, adhere the keyboard-controller board into place on the palm-rest assembly. 2. Connect the keyboard-controller board-cable to the keyboard-controller board and close the connector latch. 3. Connect the keyboard cable to the keyboard-controller board and close the connector latch. 4. Connect the keyboard-backlight cable to the keyboard-controller board . 5. Replace the two screws (M2x1.9) that secure the keyboard-backlight cable to the keyboard-controller board. Next steps 1. Install the battery. 2. Install the 2230 solid-state drive. (if applicable) 3. Install the 2280 solid-state drive. (if applicable) 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Left I/O-board Removing the left I/O-board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the battery. About this task The following image indicates the location of the left I/O-board and provides a visual representation of the removal procedure. 33