Dell Alienware m17 R2 Service Manual - Page 34
Installing the left I/O-board
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Peel the Mylar covering the system board. 2. Remove the screw (M2x3) that secures the wireless-card bracket to the left I/O-board. 3. Lift the wireless-card bracket off the left I/O-board. 4. Remove the two screws (M2x3) that secure the left I/O-board cable connecting the left I/O-board and the system board. 5. Lift the left I/O-board cable from the left I/O-board and the system board. 6. Disconnect the antenna cables from the wireless card. 7. Lift the latch and disconnect the power-button assembly-cable from the left I/O-board. 8. Remove the two screws (M2x3) that secure the left I/O-board to the palm-rest assembly. 9. Lift the left I/O-board off the palm-rest assembly. Installing the left I/O-board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the left I/O-board and provides a visual representation of the installation procedure. 34