Dell Alienware m17 R2 Service Manual - Page 48
Touchpad, Removing the touchpad
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Next steps 1. Install the system board. 2. Install the battery. 3. Install the rear I/O-cover. 4. Install the 2230 solid-state drive. (if applicable) 5. Install the 2280 solid-state drive. (if applicable) 6. Install the base cover. 7. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the rear I/O-cover. 6. Remove the battery. 7. Remove the system board. (only applicable when the touchpad cable needs to be removed) About this task The following image indicates the location of the touchpad and provides a visual representation of the removal procedure. Steps 1. Open the latch and disconnect the keyboard-controller board-cable from keyboard-controller board. 2. Lift the keyboard-controller board-cable off the palm-rest assembly. 3. Open the latch and disconnect the keyboard cable from the keyboard-controller board. 4. Fold up the keyboard cable. 5. Open the latch and disconnect the touchpad cable from the touchpad. 48