Dell Alienware m17 R2 Service Manual - Page 17
Installing the M.2 2280 solid-state drive
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
About this task NOTE: This procedure applies only to computers shipped with a M.2 2280 solid-state drive installed. NOTE: Depending on the configuration ordered your computer may have up to two M.2 cards installed. Supported card configurations per M.2 card slot: • M.2 2230 solid-state drive + 2230 mounting bracket • M.2 2280 solid-state drive The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3) that secures the M.2 thermal shield to the palm-rest assembly. 2. Lift and remove the M.2 2280 thermal shield off the M.2 2280 solid-state drive. NOTE: A thermal shield is only present on PCIe M.2 cards. 3. Slide and remove the M.2 2280 solid-state drive from the M.2 card slot on the system board. Installing the M.2 2280 solid-state drive Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: This procedure applies if you are installing a M.2 2280 solid-state drive. NOTE: Depending on the configuration ordered your computer may have up to two M.2 cards installed. Supported card configurations per M.2 card slot: • M.2 2230 solid-state drive + 2230 mounting bracket • M.2 2280 solid-state drive 17