Dell Alienware m17 R2 Service Manual - Page 52
Power-button assembly, Removing the power-button assembly
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Next steps 1. Install the system board. 2. Install the battery. 3. Install the rear I/O-cover. 4. Install the 2230 solid-state drive. (if applicable) 5. Install the 2280 solid-state drive. (if applicable) 6. Install the base cover. 7. Follow the procedure in After working inside your computer. Power-button assembly Removing the power-button assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the rear I/O-cover. 6. Remove the battery. 7. Remove the system board. About this task The following image indicates the location of the power-button assembly and provides a visual representation of the removal procedure. Steps 1. Remove the three (M2x1.9) screws that secure the power-button bracket to the palm-rest assembly. 2. Lift the power-button bracket off the power-button assembly. 3. Lift the latch and disconnect the power-button assembly cable from the left I/O-board. 4. Peel the power-button assembly and its cable off the palm-rest assembly. 52