Dell Alienware m17 R2 Service Manual - Page 35

Table 3. Antenna-cable color scheme

Get Dell Alienware m17 R2 PDF manuals and user guides View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Steps 1. Using the alignment post, place the left I/O-board on the palm-rest assembly. 2. Replace the two screws (M2x3) that secure the left I/O-board to the palm-rest assembly. 3. Connect the power-button assembly-cable to the left I/O-board and close the latch. 4. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card supported by your computer. Table 3. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 5. Using the alignment pins, connect the left I/O-board cable on the left I/O-board and the system board. NOTE: The I/O-board cable is polarity sensitive. To prevent damage to your computer ensure that the MB UMT end of the cable is connected to the system board. 6. Replace the two screws (M2x3) that secure the left I/O-board cable to the left I/O-board and the system board. 7. Place the wireless-card bracket on the wireless card . 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Steps
1.
Using the alignment post, place the left I/O-board on the palm-rest assembly.
2.
Replace the two screws (M2x3) that secure the left I/O-board to the palm-rest assembly.
3.
Connect the power-button assembly-cable to the left I/O-board and close the latch.
4.
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 3. Antenna-cable color scheme
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
5.
Using the alignment pins, connect the left I/O-board cable on the left I/O-board and the system board.
NOTE: The I/O-board cable is polarity sensitive. To prevent damage to your computer ensure that the MB UMT end of
the cable is connected to the system board.
6.
Replace the two screws (M2x3) that secure the left I/O-board cable to the left I/O-board and the system board.
7.
Place the wireless-card bracket on the wireless card .
35