Dell Alienware m17 R2 Service Manual - Page 36
Right I/O-board, Removing the right I/O-board
View all Dell Alienware m17 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
8. Replace the screw (M2x3) that secures the wireless-card bracket to the left I/O-board. 9. Adhere the Mylar over the system board and left I/O-board. Next steps 1. Install the battery. 2. Install the 2230 solid-state drive. (if applicable) 3. Install the 2280 solid-state drive. (if applicable) 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Right I/O-board Removing the right I/O-board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive. (if applicable) 4. Remove the 2280 solid-state drive. (if applicable) 5. Remove the battery. About this task The following image indicates the location of the right I/O-board and provides a visual representation of the removal procedure. 36